CDYMJ - 845 0306 KODAK FLEXICOLOR DEVELOPER REPLENISHER LORR, PART B
- MSDS: CDYMJ
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: 845 0306 KODAK FLEXICOLOR DEVELOPER REPLENISHER LORR, PART B
- National Stock Number: 6750-00D006017
Product Identification
Product ID:845 0306 KODAK FLEXICOLOR DEVELOPER REPLENISHER LORR, PART B
MSDS Date:08/09/1996
FSC:6750
NIIN:00D006017
Kit Part:Y
MSDS Number: CDYMJ
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151/716-724-4501
Cage: 19139
Contractor
Telephone: 800-828-6203
Cage: 5K871
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 70-75%
HYDROXYLAMINE SULFATE
CAS: 10039-54-0
RTECS: NC5425000
Fraction By Weight: 25-30%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTAINS HYDROXYLAMINE SULFATE. MAY
CAUSE BLOOD DISORDERS. INHALATION-EXPECTED TO BE A LOW HAZARD FOR
RECOMMENDED HANDLING. EYES-CAUSES IRRITATION. SKIN-HARMFUL IF
ABSORBED THROUGH SKIN. CAUSES IRRIT ATION. MAY CAUSE ALLERGIC SKIN
REACTION. INGESTION-MAY BE HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. EYES-IMMEDIATELY FLUSH WITH WATER
FOR 15 MIN. GET MEDICAL ATTENTION. SKIN-IMMEDIATELY FLUSH WITH
PLENTY OF WATE R FOR 15 MIN & REMOVE CONTAMINATED CLOTHES/SHOES.
GET MEDICAL ATTENTION. INGESTION-INDUCE VOMITING AS DIRECTED BY
MEDICAL PERSONNEL. CALL A PHYSICIAN OR POISON CONTROL CENTER
IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE APPROPRIATE AGENT FOR SURROUNDING FIRE. FIRE OR
EXCESSIVE HEAT MAY PRODUCE HAZARDOUS DECOMPOSITION PRODUCTS.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR. USE WATER SPRAY TO KEEP FIRE EXPOSED
CONTAINERS COOL.
Unusual Fire/Explosion Hazard:SOLUTION CONTAINS A STRONG REDUCING
AGENT. DRIED PRODUCT RESIDUE CAN ACT AS A REDUCING AGENT. ELEVATED
TEMPERATURES CAN CAUSE DECOMPOSITION.
Accidental Release
Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
MAY REQUIRE NEUTRALIZATION IF PH <2 OR >12.5. PREVENT RUNOFF FROM
ENTERING DRAINS, SEWERS, OR STREAMS. ABSORB SPILL WITH VERMICULITE
OR OTHER INERT MATERIAL , THEN PLACE IN A CONTAINER FOR CHEMICAL
WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CONTENTS MAT DEVELOP PRESSURE UPON
PROLONGED EXPOSURE TO HEAT. KEEP CONTAINER TIGHTLY CLOSED TO
PREVENT LOSS OF WATER. STORE IN A COOL PLACE.
Other Precautions:STORE IN ORIGINAL CONTAINER. KEEP AWAY FROM
INCOMPATIBLE SUBSTANCES. AVOID CONTACT WITH EYES, SKIN AND
CLOTHING. WASH THOROUGHLY AFTER HANDLING. USE WITH ADEQUATE
VENTILATION.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES PER
HOUR) SHOULD BE USED. RATES SHOULD MATCH CONDITIONS.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:EYE BATH, WASHING FACILITIES, SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
KEY2: HCC=C1. THIS IS A THREE PART KIT WITH A WORKING SOLUTION.
CORROSIVE.
Chemical Properties
HCC:C2
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18
Vapor Density:0.6
Spec Gravity:1.157
pH:3.0
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS. ODORLESS. LIQUID.
Percent Volatiles by Volume:70-75
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, COMBUSTIBLE MATERIALS, HALOGENATED MATERIALS.
Stability Condition to Avoid:STABLE; HOWEVER, MATERIAL CAN DECOMPOSE
ABOVE 110C (230F). AVOID HEATING ABOVE ROOM TEMPERATURE.
Hazardous Decomposition Products:AMMONIA, NITRGEN OXIDES, SULFUR
DIOXIDE.
Disposal
Waste Disposal Methods:DISCHARGE, TREATMENT OR DISPOSAL MAY BE SUBJECT
TO LOCAL, STATE AND FEDERAL REGULATIONS. FLUSH TO SEWER WITH LARGE
AMOUNTS OF WATER. SINCE EMPTIED CONTAINER RETAIN PRODUCT RESIDUE,
FOLLOW LABEL WARNIN GS EVEN AFTER CONTAINER IS EMPTIED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.